what grit sandpaper to scuff clear coat

Best answer 1500 to 2000 Grit People also ask What grit sandpaper should I use for clear coat? 40 to 80 Grit 鈥?This sandpaper grit is very course and will leave behind visible marks, so it is not recommended for small clear coat scratches and ot

Best answer


1500 to 2000 Grit

People also ask


  • What grit sandpaper should I use for clear coat?

  • 40 to 80 Grit 鈥?This sandpaper grit is very course and will leave behind visible marks, so it is not recommended for small clear coat scratches and other similar applications. Instead, it is recommended for any rough sanding that needs to be done prior to body work, as well as, shaping body filler.

  • What is the best grit to wet sand?

  • Fine grit, wet, and that will get into the crevices and holes better than sandpaper will. These areas are especially important to make sure the paint doesn’t start lifting from these edges. You can use 400 if you wet-sand carefully.

  • What grit sandpaper should you use to remove rust from car panels?

  • With a 40-grit piece of sandpaper, rust can be rubbed away before it spreads. Afterwards, you鈥檒l also want to smooth out the affected area with a higher-grit sandpaper, and then seal off the spot with a paint touch-up. In contrast to sandpapers in the 32 to 40-grit range, 80-grit sandpaper is not terribly rough on the surface of vehicle panels.

  • Can you wet sand with red sandpaper?

  • Don’t use the red as it is too coarse. Use a Scotchbrite pad. Fine grit, wet, and that will get into the crevices and holes better than sandpaper will. These areas are especially important to make sure the paint doesn’t start lifting from these edges. You can use 400 if you wet-sand carefully.

    Leave a Reply