how to skim coat basement walls

Best answer How do you skim coat a basement wall?Spread the cement onto the wall,using the flat side of the trowel to smooth the cement. Remove excess cement using the edge of the trowel in a scraping motion. Apply a thick enough coat to cover the s

Best answer


How do you skim coat a basement wall?Spread the cement onto the wall,using the flat side of the trowel to smooth the cement. Remove excess cement using the edge of the trowel in a scraping motion. Apply a thick enough coat to cover the surface with an even coat of cement. Allow the skim-coat to dry for 24 hours before painting.

People also ask


  • How do you skim coat a concrete wall?

  • Spread the cement onto the wall, using the flat side of the trowel to smooth the cement. Remove excess cement using the edge of the trowel in a scraping motion. Apply a thick enough coat to cover the surface with an even coat of cement. Allow the skim-coat to dry for 24 hours before painting. Popular Trending About Us Asked by: Haiyun Victoire

  • When do you need a skim coat on walls?

  • You may need a skim coat if you are repairing a crack, filling a joint, or leveling an area with an existing flat surface. Spread a skim coat with a trowel or drywall knife over a rough wall or ceiling to create a flat surface for painting or wallpapering. In general, you will need to apply 2鈥? coats before the surface is smooth.

  • What is skim coating and how does it work?

  • Skim coating can freshen up old concrete blocks and give your home or a wall on your property a new look. The process involves applying a layer of cement over the concrete block wall to cover grout lines or stains and give the surface a smooth appearance.

  • How to skim a wall with drywall compound?

  • Apply the first scoop. 1 Start in one corner of the wall, and work down from the highest point. If you are skimming a ceiling, start at an edge and work towards the center. 2 Apply the drywall compound at a 45 angle, then pull it in whatever direction you need. … 3 If you have never skimmed before, try practicing on a piece of scrap drywall. …

    Leave a Reply