how to skim coat basement walls

Best answer How do you skimcoata basementwall? Spread the cement onto the wall, using the flat side of the trowel to smooth the cement. Remove excess cement using the edge of the trowel in a scraping motion. Apply a thick enough coat to cover the su

Best answer


How do you skimcoata basementwall? Spread the cement onto the wall, using the flat side of the trowel to smooth the cement. Remove excess cement using the edge of the trowel in a scraping motion. Apply a thick enough coat to cover the surface with an even coat of cement. Allow the skim-coat to dry for 24 hours before painting.

People also ask


  • How do you skim coat a concrete wall?

  • Spread the cement onto the wall, using the flat side of the trowel to smooth the cement. Remove excess cement using the edge of the trowel in a scraping motion. Apply a thick enough coat to cover the surface with an even coat of cement. Allow the skim-coat to dry for 24 hours before painting. Popular Trending About Us Asked by: Haiyun Victoire

  • When do you need a skim coat on walls?

  • You may need a skim coat if you are repairing a crack, filling a joint, or leveling an area with an existing flat surface. Spread a skim coat with a trowel or drywall knife over a rough wall or ceiling to create a flat surface for painting or wallpapering. In general, you will need to apply 2鈥? coats before the surface is smooth.

  • How to skim a wall with drywall compound?

  • Apply the first scoop. 1 Start in one corner of the wall, and work down from the highest point. If you are skimming a ceiling, start at an edge and work towards the center. 2 Apply the drywall compound at a 45 angle, then pull it in whatever direction you need. … 3 If you have never skimmed before, try practicing on a piece of scrap drywall. …

  • How do I choose the best skim-coat materials?

  • There are two typical choices for skim-coat materials: Pre-mixed joint compound comes ready to apply to the surface. After application, it gradually dries out. As such, you can add more water to the mixture to extend your working time. If you have never applied a skim coat before, you may find it easiest to use a ready-to-use pre-mixed product.

    Leave a Reply