how to fix rough clear coat

Best answer How to Fix Clear CoatGather your materials. Luckily you probably have most of the required materials on-hand.Clean and mask off the area. Use the degreaser to get rid of any wax that may be leftover on the vehicle鈥檚 surface. ...Sand th

Best answer


How to Fix Clear CoatGather your materials. Luckily you probably have most of the required materials on-hand.Clean and mask off the area. Use the degreaser to get rid of any wax that may be leftover on the vehicle鈥檚 surface. …Sand the damaged clear coat. Use the 800-grit sandpaper to smooth the peeling clear coat until it is no longer rough. Lightly sand the area around the peeling.Apply the new clear coat. Before spraying the clear coat,shake the can for at least a minute. …Finish with a polish. Apply a rubbing compound and then polish the area with a buffer. Use a low setting and apply light pressure.

People also ask


  • How do you fix rough clear coat on a car?

  • Use an 800-grit sandpaper to sand down the rough clear coat until you can’t feel it anymore. Go lighter on the surrounding clear coat, as you are trying to smooth and blend the damaged area, not remove more clear coat. Wipe clean with a microfiber cloth and isopropyl alcohol to remove any contaminants left by sanding.

  • How do you fix clear coat that is peeling off?

  • Go lighter on the surrounding clear coat, as you are trying to smooth and blend the damaged area, not remove more clear coat. Wipe clean with a microfiber cloth and isopropyl alcohol to remove any contaminants left by sanding. To spray new clear coat, shake the aerosol can for at least a minute, then apply a light first coat.

  • How do you remove degreaser from clear coat?

  • This removes any leftover degreaser and foreign contaminants that could mar the clear coat. Mask off the repair area using painter’s tape, applying about an inch outside the damaged area. Use an 800-grit sandpaper to sand down the rough clear coat until you can’t feel it anymore.

  • How do you get rid of runs on clear coat?

  • QA: What鈥檚 the best way to get rid of RUNS on clear coat? Runs on Clear Coat: Give it a couple of days. If you鈥檙e in a rush, you could probably do it the next day depending on what speed clears, if you鈥檙e using a speed-clear. Sometimes you could buff the next day or you can buff six hours later.

    Leave a Reply