how to do epoxy coating

Best answer Use a foam brush to pull the epoxy towards the edges of the wood. Place the foam brush in the puddle of epoxy and begin using the brush to pull the epoxy over the edges using back and forth motions. Try to create as even of a layer of ep

Best answer


Use a foam brush to pull the epoxy towards the edges of the wood. Place the foam brush in the puddle of epoxy and begin using the brush to pull the epoxy over the edges using back and forth motions. Try to create as even of a layer of epoxy as possible, making sure the whole piece of wood is coated.

People also ask


  • How to DIY epoxy floor coatings?

  • DIY Epoxy Floor Coatings 1 Process Overview 2 Kit Contents. … 3 Area Project Preparation. … 4 Tools and Materials. … 5 Cleaning the Floor. … 6 Preparing the Floor Surface. … 7 Base Coat Application. … 8 Adding Decorative Chips. … 9 Applying the Top or Finish Coat. … 10 Summary. … More items…

  • What is epoxy coating?

  • Applying an epoxy coating to the barrels repaired the worn surfaces, protected them from future abrasion caused by the putty and created an ultra-smooth layer for the putty to slide down, improving extrusion rate. Epoxy coatings are also used for high-strength bonding of materials.

  • How long does it take for epoxy to dry before painting?

  • If you鈥檙e dealing with a newly installed slab, it is important to wait at least 28 days, but preferably 2 months, before applying epoxy. This gives the floor time to cure and dry thoroughly prior to coating. Remove floor paint, if necessary. Epoxy coating will not work properly if it is applied over polyurethane or latex floor paints.

  • Can You epoxy over polyurethane?

  • Remove floor paint, if necessary. Epoxy coating will not work properly if it is applied over polyurethane or latex floor paints. If your floor is covered in one of these materials, you will need to strip your floor before you can begin the epoxy process. For a large area, you might try soda blasting the paint.

    Leave a Reply