Part 1 of 2: Buffing a clear coatSoak the sandpaper. Take all of your sandpaper and put it in a bucket full of clean water and let it soak for roughly ten minutes up to …Wash your car. You want to make sure your car is very clean before you begin your work,so wash it very thoroughly with soap and a brush …Begin to wet-sand the clear coat. …More items…
People also ask
Do you need to buff clear coat?
Learn more… You don’t need to be a pro to perfectly buff the clear coat on your car. With the proper tools and material, some time, and some elbow grease, you can have that high-gloss finish you want. Wait a day or so to let the clear coat harden if the finishing is new.
What is the best way to clear coat a car?
Steps Wait a day or so to let the clear harden if the finishing is new. Get a buffer. Use a product such as 3M Micro-finish which can be purchased at automotive paint stores. Apply to an area no more than two feet square at a time. Experiment with the speed to achieve the best results. Wipe off any residue on the surface after compounding the area.
How long should clear coat dry before buffing?
If you have recently applied clear coat to a paint job, it鈥檚 time to buff it out to a high shine. Clear coat should be allowed to harden for at least 24 hours before attempting to use a buffer. In most cases, you will be trying to remove 鈥渙range peel鈥?when buffing a new paint job.
How do you get scratches out of clear coat?
The clear coat should be wet-sanded with 400 grit sandpaper. This is to replace the orange peel with finer and finer scratches, which will eventually be filled in with polish. The sanding steps help diminish the clear coat until the entire surface is smooth. The polishing helps smooth out the scratches made by the sandpaper.